How to Use a Kreg Jig

admin | January 11, 2020 | 1 | Buyer’s Guide

Kreg Jig is one of the most popular tools used for drilling holes in any woodwork project. Whether you are a professional woodworker or working in your creative DIY project, Kreg Jig can help you to a great extent to join pieces of wood effortlessly. Also, you will have a stronger and more secure bonding that will last comparatively longer than the traditional wood joinery when using a Kreg Jig. In this post, we are going to guide you How to Use a Kreg Jig in your woodwork project. We hope you will find it a lot easier, even if you are a newbie and don’t have prior experience using a Kreg Jig. Let’s get started in the following.

How to Use a Kreg Jig?

As a first time user, it might seem to you that using a Kreg Jig in woodwork project is a complicated process. But, the truth is just the opposite. Kreg Jigs are surprisingly simple to use. What is most amazing is- you don’t have to be a pro to use a Kreg Jig system for drilling pocket holes and join pieces of wood perfectly. All you need to drill pocket holes at the perfect angle is- measure the thickness of the wood, set your jig accordingly following the instructions below, and start drilling.

Know The Basic of A Kreg Jig

When you have the Kreg Jig right in your hand, the very first thing you need to do is- going through the instructions provided with the tool before diving into the real project. Before you proceed to work with the jig system, it is your duty to know how the machine actually works.

A Kreg Jig mainly contains three major components- a drill stand, a drill bit with stop collar, and a measuring scale. The pointed bit penetrates through the grain of the wood very easily and drills holes. The stop collar in the bit helps in drilling holes at the exact distance while the drill stand holds the accurate angle.

Step 1: Measure the Wood

Before you actually start drilling, you need to measure the thickness of the pieces of wood you are looking forward to joining. It is always the best choice to measure the pieces manually other than relying on the label of the packaging. Measuring the thickness of the wood will help you drilling perfect pocket holes at the right angle later on.

Step 2: Set Your Jig Bit at Right Depth

When you are done with measuring the wood, it’s time to set the exact depth on the drill bit and secure the stop collar tightly. The stop collar on the neck of the drill bit will prevent from drilling too far, which is a pretty nice feature of the best pocket hole jig. However, make sure to set the stop collar correctly if you really don’t like to mess up things.

Step 3: Mount Your Wood, Drill Pocket Hole, and Drive Screws

Now, it’s time to mount the pieces in the jig when you are done with the steps above. Place the pieces of wood in the jig and position appropriately according to the measurement. Now, tighten the thumbscrew on the back of the jig and clamp the tool securely with your working board. Make sure the jig will stay firm when you start drilling. Now, pull the lever to clamp the wood tightly with the jig and start drilling pocket holes according to your requirement.

Finally, when you are done with drilling pocket holes, it’s time to drive screws and join the pieces tightly. Remember to use recommended pocket hole screws for a stronger and longer lasting bonding.

While concluding, we expect that you read between the lines and come to know How To Use A Kreg Jig in any woodwork. Check out our detailed guide on Pocket Hole Jig to find out more about the Kreg Jig system and its advantages in woodwork project. Hope this post was useful and you enjoyed reading.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts

Recent Comments